You are not logged in.   Login  |  REGISTER  |  Help
Event Information  |    |    | 
D M C "UNISAND K 1350" WIDE BELT (50" - 90", 4-HEAD)
Equipment Location: Novato, CA
SX-320035   |  Lot # 2758-00
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Amanda Solomon
(877) 580-5844 ext. 374
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Talice Luna ext 379

Opening Bid: $ 500   Reserve Not Met
The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.
Next Minimum Bid: $ 500  
Your Bid:
Click or Enter Bid)
  Place Your Bid
Your Proxy Bid:
  Place Proxy Bid  Help
# of Bids: 0   
End Time:
Auction Closed.
Auto Refresh:   Enable Refresh Every

Brand/Model: D M C "UNISAND K 1350"
Year MFG: 2005
Machine Type: WIDE BELT (50" - 90", 4-HEAD)
Serial #: SA/005325
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
Location: Novato, CA
Condition: Good condition
Dimensions: 120" L  x  96" W  x  96" H
Weight: 12,000 Lbs (estimate)
Loading: Rigger Required
Comment: This is a rare find and very well priced!
Buyer Premium: 12.5%

DMC UNISAND K-1350 Wide Belt Sander, (4) Heads
53" Width cap. Drum, Drum, Orbital,  Orbital Head

Head Configuration

1st Head: Belt Back Roll D = 165mm Work Width = 1350mm Electrical Components 460 V 60hz Group Roller Calibrating / Sanding Roll Diameter 320 Mm. Roller Rubber 85 Shore On / Off Air Roll Engine 26 kW (35 HP)

2nd Head Automatic Positioning Units Group Roller Gauge / Sanding Oscillating Blower For Tape Cleaning Bush Blower For Cleaning Tape Roll R-Cl Diameter 320 Mm. Roller Cal / Sanding Rubber 65 Shore On / Off Air Roll Engine 22 kW (30 HP)

3rd & 4th Head Group Superfinisher Orbital Pad "Fs / Po" Intermediate Blowers Between Two Groups Orbital Fifth Group Orbital Pad "Fs / Po" Machine With Group Orbital Double Blower Intermediate Orbital


Double Entry Roller ˜˜ Hardness 50 Shore Conveyor Belt ˜˜ Measure Unit In Inches; Electronic Positioning Of Working units ˜˜ Connection Master-Slave Control Hydra ˜˜ Busy Machine Photoelectric Sensor ˜˜ Feed Belt Motor With Inverter 5.5 kW

Equipped with and Features: ˜˜ Ferrari Vacuum Blower Hold down for feed belt ˜˜ Automatic Regulating Flow Valve ˜˜ Muffler For Depressor ˜˜ Double Auction Blowers For Pieces Cleaning ˜˜ Electronic "Inch" thickness readout device for the working thickness positioning without the need for direct mechanical contact. ˜˜ Electronic device is equipped with a decimal regulator system to set the bed higher or lower than the thickness of the workpiece.

Operator & Machine Controls: ˜˜ Hydra V-Pad PLC Control panel with: a 5.7" LCD Color Touch-Screen display, manual settings or memory storage for up to (120) individual working programs. ˜˜ Hydra V-Pad PLC Control offers complete management of EPICS electronic sectional pads on infeed & outfeed sections of the workpiece, management.

Dims & weight: Machine is approx. 12,000 Lbs, 96 w x 120 L x 96 H Separate vacuum 24 x 24 x 72 inches Needs a rigger to load

NOTE: Some spec's need to be verified. The actual Model number is USK-1350M4. This is not a constant pass line sander

Machine State: In storage, easily accessible

Inspection: Available for Inspection (By Appointment Only)

    Final Removal Date: 3/15/2023

    Note: Number of bids and bid amounts shown may vary slightly from real time.