HOLZMA "HPL 11-43/16" REAR LOAD, AUTOMATIC PANEL SAW

Abrasive Planers
Air Compressors
Boring Mach. - 32 MM
Boring Misc. - Vertical
CNC - Routers
CNC -Flat Table Mach. Ctr.
CNC -Pod & Rail Mach. Ctr.
Door & Stair Mfg Equipmnt
Dovetail & Drawer Equip.
Dust Collector under 20 HP
Edgebanders
Edgebanders
Finishing - Ovens & Curing
Finishing - Sand/Denib/Clean
Finishing-Spray & Air M-Up
Finishing-Systems & Lines
Fork Lifts
Glass Machinery
Glue & Dowel Inserters
Glue Equipment
Laminating-Wrap/Foil/Roll
Louver & Shutter Equip.
Mat. Handlg - Pkging/Misc
Milling Machinery
Miscellaneous Equipment
Moulders - Feed Through
Panel Saws
Panel Saws - Sliding
Panel Saws - Vertical
Planers - Single & Facing
Sanders-Stroke & Edge
Saws - Cutoff & Miter
Saws - Table & Misc.
Stone Machinery
Tooling - Bit, Rip & Cut
Window-Wood Equipment

Auction Home > Panel Saws

MY MACHINERY AUCTION

Event Information | | |

Equipment Location: St-Pie, QC

Item in POWERBID

PK-320034 | Lot # 1958-06

VIEW ALL MACHINE PHOTOS

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

(877) 580-5844 ext.
Intl. +1 (704) 841-2001

Enter Name
Enter Phone
Enter Email Invalid Email

If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com

Opening Bid:

$ 500

Reserve Not Met

The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.

Next Minimum Bid:

$ 500

Your Bid:
(Click or Enter Bid)

Place Your Bid

Your Proxy Bid:

Place Proxy Bid Help

# of Bids:	0
End Time:	Auction Closed.

Auto Refresh:

Enable Refresh Every


Bulk Bidding: Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
This lot is part of a bulk bid group. Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
Current Total:
Current Bulk Bid:
	Click Here to View Bulk Bid

Event:	MY MACHINERY AUCTION
Brand/Model:	HOLZMA "HPL 11-43/16"
Year MFG:	2002
Machine Type:	REAR LOAD, AUTOMATIC PANEL SAW
Serial #:	0-240-15-2519
Elect./Voltage:	600 V, 60 Cy, 3 Ph.
Location:	St-Pie, QC

Value New:	$
Negotiable Price:	$

Condition:	Requires repair
Dimensions:	456" L x 288" W x 96" H
Weight:	12,000 Lbs (estimate)
Loading:	$ 500 Loading fee
Comment:	New Computer

Buyer Premium:

12.5%

Description:

HOLZMA HPL 11-43/16 REAR LOAD, AUTOMATIC PANEL SAW:

Specifications:
169" (4,300 mm) Cutting length & pull back, 4.9" (125 mm) max. main blade projection, 28 HP (21 kW) main & 3 HP (2.2 kW) scoring motor.

Saw Carriage:
Variable saw carriage with: AC Frequency drive, travel speed from 32 - 410 FPM (10 - 125 MPM), constant return of 410 FPM (125 MPM).

Pusher Fence:
Electronically controlled, AC frequency drive controlled overhead program fence, rack & pinion driven on both sides,

Forward speed from 32 - 262 FPM (10 - 80 MPM), return speed of 262 FPM (80 MPM); (8) gripper clamps that open up to 4.75".

Operator & Machine Control:
Holzma IPC with WINDOWS XP + "CADmatic 3.0" operating system; 15" Color monitor, moving graphics (displays cutting dimensions & error diagnostic), virtually unlimited cutting dimension memory.

Data input by keyboard, 1.44MB floppy disk drive; direct downloading from office PC through RS-232 connection is possible.

Lift Table:
Automatic 4-column, 170" x 63" (4,300 x 1,600 mm) rear load lift table with fork cut-outs, 26" (680 mm) max. bunk height without pit or risers, 14,000 Lbs (6,363 kg) lift cap.

Complete With:
Combi-rollers rear machine table, (10) profile support rails at 50 mm centers; Front of machine with (5) air floatation tables 85" x 26" (2,160 x 650 mm).

Includes: Headcut rotation device behind the cut line in the pusher area.
Max. stack height (without pit): 680 mm (26.77"). Max. stack height (with pit): 920 mm (36.22").
(2) aligning devices on the rear table for aligning packets of material from the lift; "Power-Loc" quick blade change system for main/scoring blades.

Supply Services Required: Total connected load in kW: 35. Draw is 39 amps at 600/3/60 V. Total air requirement at 6 bar (88 PSI).@ 30 l/min (1.05 CFM)
Heavy Duty square fence, automatic side pressure device with front & rear forks 1.96" - 96" (50 - 2,400 mm) stroke,

Actual model is Holzma HPL 11-43/16 Profi-Line.

PROFESSIONAL DISMANTLING AND LOADING BY SELLER IS AVAILABLE, please inquire for extra cost!
Machine State: Still in Operation
Inspection: Available for Inspection (By Appointment Only)

Final Removal Date: 5/12/2021

Note: Number of bids and bid amounts shown may vary slightly from real time.

View complete terms and conditions


	Condition	All equipment is offered “as is, where is, with all faults” and no guarantee or warranty. EXF does not accept responsibility regarding the accuracy of information or descriptions supplied.


	Overtime	If a bid is made during the final (5) minutes of the item's scheduled time in the auction, the auction clock will be reset to (5) minutes until ALL bidding ceases.


	Currency	All bidding is in US-Dollars; payment must be in US-Currency. CDN Bidders and Buyers, will also be charged the applicable sales taxes such as GST, PST, and HST for Canadian Auction Events.


	Processing Fee	Buyer agrees that all transactions are subject to a $ 25 Processing Fee for all items purchased on the same calendar day in the same auction event.


	Payment	Buyer agrees to remit payment via Certified Check, Wire Transfer, Company Check, or Credit Card to EX-FACTORYAuctions by the close of the 3rd business day following the receipt of Invoice. NOTES: In the event the Buyer elects to make payment by accepted Credit Cards, a 3% Administrative Fee will be added. Credit Card payments are limited to …US-$ 7,500. Only Credit Cards issued by a US or Canadian Financial Institutions are accepted. Upon receipt of Invoice, you may use our Credit Card Payment Gateway for payment.NOTE: Canadian Credit Card payments will be processed as USD. Should the Buyer elect to make payment by Company Check, lots are unavailable for pick up or shipment until the check clears. Company Checks clear after (5) business days.


	Inspection	Offered equipment is available for inspection by appointment with a minimum of (36) hours notice unless otherwise stated.

General Loading & Shipping Info

Loading Types	Buyer is responsible for all loading costs associated with this lot. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere). If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.

Shipping & Freight	The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.

Pick-Up Hours	Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.

This Lot Only

Loading Fee	$ 500 Loading Fee For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer. Palletizing, crating, or special loading procedures are not included.

Removal:	5/12/2021 is the Final Date for Removal.

If you have any other questions related to shipping prior to an auction closing that are not answered above, please use the form below to contact us. We work diligently to answer all requests. Questions asked on the day an auction closes may be answered after bidding has ended.

I need the following information (Check each item that applies):

Can the seller Crate the item for common carrier shipment?

Do you know a rigger who can dismantle the equipment?

Can you provide installation and training?

Can I pick up the item myself?

Can you make arrangements to have the equipment loaded into an ocean container?

Add Questions Below (Enter each question per line)

I need the following information (Check each item that applies):

How can I arrange an inspection of this equipment.

Can you have the equipment disconnected and loaded?

Can you make all shipping arrangements to my door?

Can you provide a Technician to install this machine?

Where do I get Service/Parts for this machine?

Can I lease the equipment?

Add Questions Below (Enter each question per line)

1805 Sardis Rd. North | Charlotte, NC 28270 USA
US & Canada 877.580.5844 | Intl: +1 704.841.2001
info@exfactoryauctions.com

Subscribe to Stay Informed on Current and Upcoming Auction Events
Follow Us on Social Media:
Copyright © EX-FACTORY INC. \| All Rights Reserved