You are not logged in.   Login  |  REGISTER  |  Help
Event Information  |    |    | 
Equipment Location: GRIDLEY, KS
EU-230731   |  Lot # 005
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Kevin Welker
(877) 580-5844 ext. 316
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Talice Luna ext 379


Current Bid: $ 4,076   No Reserve
This Lot is being sold without a reserve.

The highest bidder will win this Lot. In the event that no bids are placed, this Lot will NOT be sold.
Next Bid Increment: $ 4,151  
Your Bid:
Click or Enter Bid)
  Place Your Bid
Your Proxy Bid:
  Place Proxy Bid  Help

Proxy Bid:

A Proxy bid is the maximum dollar amount you are willing to bid for a specific lot. The system automatically bids up to that amount on your behalf against competing bidders (if any).

EXAMPLE: You enter a "Max Proxy Bid" amount of $500 when the lot's reserve is met and the high bid is $100.  Your Proxy Bid automatically raises your bid to the next minimum bid amount, which in this example is $125, and thus makes you the current high bidder.  When a competing bidder bids $150, the system again automatically places a next increment bid of $175 for you, making you the high bidder again.  If a competing bidder bids again, proxy bidding continues until your "Max Proxy Bid" of $500 is exceeded by a bid from a competing bidder. If your high bid is not exceeded by the end of the Auction, then you win the lot.

ADVANTAGES: Should your schedule prevent you from participating near the closing of an Auction, your "Proxy Bid" quickly bids on your behalf.  Also, when your and a competing bidder's proxy bids are of equal amount ($500 in the example) at the end of the Auction, your bid wins, because you entered your $500 "Proxy Bid" amount first.

# of Bids: 33   
End Time:
Auction Closed.
Auto Refresh:   Enable Refresh Every

Brand/Model: BIESSE "AKRON 855"
Year MFG: 2005
Serial #: 52196
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Location: GRIDLEY, KS
Condition: Requires repair
Dimensions: 288" L  x  72" W  x  72" H
Weight: 7,750 Lbs (estimate)
Loading: Seller Loading
Comment: Complete with pre-mill!
Buyer Premium: 15%

Edgebander with Pre-Mill

  •  NOTE: Corner Rounding, Buffing, & Blowing Units are not functional

  •  Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness, 14 - 65 mm (0.55" - 2.56") Edge height, 10 - 60 mm (0.39" - 2.36") Panel thickness, 140 mm (5.50") Minimum panel length, 85 mm (3.30") Minimum panel width

  • Machine hours (Please see photo)


  • Pre-Milling Unit, "FI-701": Rectifies face to be edged before applying glue, Horizontal & vertical movement of (2) motors on linear guides, Independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) 12,000 RPM Motors, Independent copying pads on each unit, Auto-set device to ensure optimum positioning of cutters according to thickness of panel being machined

  • Edge Feeding, Gluing & Pressing Unit: With Automatic edge magazine for strip & coil stock, 3 mm (0.04") PVC Guillotine, Includes: Pre-Melt ,"QM-701", For quick heating & tank changing with Floating & bidirectional glue roller applicator

  • Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM)


  • End (Edge) Trimming Unit, "IN-701-V": (2) .35 kW (1/2 HP) 12,000 RPM Motors, Automatic 4-position programmable chamfer from control panel (0°, 3.6°, 11°, 15°), Sliding in slicing motion on 45° precision guide bar with Oversized bearing blocks

  • Superimposed Flush (Double Edge) Trimming Unit, "RS-701": Top & bottom, (2) 0.8 kW (1 HP) 12,000 RPM Motors with Superimposed motor position, 1° Tilt capability

  • Tilting Top & Bottom Trimming Unit, "RI-701": (2) 0.65 kW (.87 HP) 12,000 RPM Motors, For radius top & bottom fine trimming, Unit can be tilted 0° - 45°

  • Corner Rounding Unit, "CR-200V": For corner rounding, top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (.20") Maximum edge thickness

  • Edge Scraping Unit, "RB-701": For finishing rounded off edges in PVC or ABS up to 5 mm (0.20") thickness

  • Flat (Glue) Scraper: Top & Bottom, Removes potential excess glue before buffing unit

  • Buffing Unit, "SPL-700": Top & bottom

  • Hot Air Blower Unit, "PH-700": (2) STEINEL 2,000 W, Reactivates color of thick plastic


  • PC-based control panel with 15" Color LCD monitor, HF (High Frequency) motors on all cutting & trimming workstations

  • Top pressure beam programmable via positioning motor, Top pressure provided by belt hold-down

  • 36" Diameter Coil table, Padded sound enclosure
Final Removal Date: 10/13/2023

Note: Number of bids and bid amounts shown may vary slightly from real time.