You are not logged in.   Login  |  REGISTER  |  Help
 
    
Event Information  |    |    | 
BIESSE "AKRON 855" EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Equipment Location: GRIDLEY, KS
EU-230720   |  Lot # 004
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Kevin Welker
(877) 580-5844 ext. 316
Intl. +1 (704) 841-2001



If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com

[EU-011249]


This is a non-auction item up for sale. If interested, please call Kevin Welker at (877) 580-5844 ext. 316 or click on the link below.


Event: COUNTERTOP TRENDS
Brand/Model: BIESSE "AKRON 855"
Year MFG: 2005
Machine Type: EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Serial #: 52196
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Location: GRIDLEY, KS
Value New: $ 145,000
Negotiable Price: $ 17,500     Make an Offer
Condition: Fair condition
Dimensions: 288" L  x  72" W  x  72" H
Weight: 7,750 Lbs (estimate)
Loading: Seller Loading
Comment: Complete with pre-mill!

Description:
Edgebander with Pre-Mill

  •  NOTE: Corner Rounding, Buffing, & Blowing Units are not functional

  •  Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness, 14 - 65 mm (0.55" - 2.56") Edge height, 10 - 60 mm (0.39" - 2.36") Panel thickness, 140 mm (5.50") Minimum panel length, 85 mm (3.30") Minimum panel width

  • Machine hours (Please see photo)


    INFEED SECTION:

  • Pre-Milling Unit, "FI-701": Rectifies face to be edged before applying glue, Horizontal & vertical movement of (2) motors on linear guides, Independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) 12,000 RPM Motors, Independent copying pads on each unit, Auto-set device to ensure optimum positioning of cutters according to thickness of panel being machined

  • Edge Feeding, Gluing & Pressing Unit: With Automatic edge magazine for strip & coil stock, 3 mm (0.04") PVC Guillotine, Includes: Pre-Melt ,"QM-701", For quick heating & tank changing with Floating & bidirectional glue roller applicator

  • Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM)


    WORKSTATIONS:

  • End (Edge) Trimming Unit, "IN-701-V": (2) .35 kW (1/2 HP) 12,000 RPM Motors, Automatic 4-position programmable chamfer from control panel (0°, 3.6°, 11°, 15°), Sliding in slicing motion on 45° precision guide bar with Oversized bearing blocks

  • Superimposed Flush (Double Edge) Trimming Unit, "RS-701": Top & bottom, (2) 0.8 kW (1 HP) 12,000 RPM Motors with Superimposed motor position, 1° Tilt capability

  • Tilting Top & Bottom Trimming Unit, "RI-701": (2) 0.65 kW (.87 HP) 12,000 RPM Motors, For radius top & bottom fine trimming, Unit can be tilted 0° - 45°

  • Corner Rounding Unit, "CR-200V": For corner rounding, top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (.20") Maximum edge thickness

  • Edge Scraping Unit, "RB-701": For finishing rounded off edges in PVC or ABS up to 5 mm (0.20") thickness

  • Flat (Glue) Scraper: Top & Bottom, Removes potential excess glue before buffing unit

  • Buffing Unit, "SPL-700": Top & bottom

  • Hot Air Blower Unit, "PH-700": (2) STEINEL 2,000 W, Reactivates color of thick plastic


    Includes:

  • PC-based control panel with 15" Color LCD monitor, HF (High Frequency) motors on all cutting & trimming workstations

  • Top pressure beam programmable via positioning motor, Top pressure provided by belt hold-down

  • 36" Diameter Coil table, Padded sound enclosure
 
  

Note: Number of bids and bid amounts shown may vary slightly from real time.