You are not logged in.   Login  |  REGISTER  |  Help
 
     NEXT >
  |    | 
HOMAG "KAL 310/4/A3/S2" EDGEBANDER (W/PRE-MILLING)
EO-320021   |  Lot # 1371-337
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Amanda Solomon
(877) 580-5844 ext. 374
Intl. +1 (704) 841-2001



If not available, try his/her backup:
Talice Luna ext 379
tluna@exfactory.com



Opening Bid: $ 1,500   Reserve Not Met
The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.
Next Bid Increment: $ 1,500  
 
     
Your Bid:
(
Click or Enter Bid)
  Place Your Bid
     
Your Proxy Bid:
  Place Proxy Bid  Help

Proxy Bid:

A Proxy bid is the maximum dollar amount you are willing to bid for a specific lot. The system automatically bids up to that amount on your behalf against competing bidders (if any).

EXAMPLE: You enter a "Max Proxy Bid" amount of $500 when the lot's reserve is met and the high bid is $100.  Your Proxy Bid automatically raises your bid to the next minimum bid amount, which in this example is $125, and thus makes you the current high bidder.  When a competing bidder bids $150, the system again automatically places a next increment bid of $175 for you, making you the high bidder again.  If a competing bidder bids again, proxy bidding continues until your "Max Proxy Bid" of $500 is exceeded by a bid from a competing bidder. If your high bid is not exceeded by the end of the Auction, then you win the lot.

ADVANTAGES: Should your schedule prevent you from participating near the closing of an Auction, your "Proxy Bid" quickly bids on your behalf.  Also, when your and a competing bidder's proxy bids are of equal amount ($500 in the example) at the end of the Auction, your bid wins, because you entered your $500 "Proxy Bid" amount first.

# of Bids: 0   
End Time:
10 Days, 23 Hours, 19 Minutes
(5/31/2022  1:04pm EST)
Auto Refresh:   Enable Refresh Every

Brand/Model: HOMAG "KAL 310/4/A3/S2"
Year MFG: 2004
Machine Type: EDGEBANDER (W/PRE-MILLING)
Serial #: 0-200-03-6994
Elect./Voltage: 208 V, 60 Cy, 3 Ph.
Location: ZEELAND (Warehouse), MI
Dimensions: 0" L  x  0" W  x  0" H
Weight: Lbs (estimate)
Loading: $ 250 Loading fee
Comment: Just came out of service! Ready to go to work for you!
Buyer Premium: 12.5%

Description:
HOMAG KAL 310/4/A3/S2 Edgebander with Pre-Milling

Working Capacity:
  • 0.3 - 3 mm Edge thickness cap., min. panel width 22 mm; max. panel thickness 60 mm; Dual speed

    Equipped with:
  • Pre-Milling Unit 3481: (2) motors, 3 kW, 9000 RPM each, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence.
  • Hot Melt Glue System "QA 34" Quick-Melt Unit: with heated glue roller;
  • Edge Magazine Unit 2456: Automatic (2) coil/strip magazine, coils 0.3 - 3.0 mm.
  • Pressure Section: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; with pneumatic pressure control for straight edges
  • HOMATIC "NC 21" Power Control System: Controller operates in Windows-XP environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem.

    Workstations:
  • End Trimming Unit: (2) motors, 0.18 kW - 12,000 RPM each, to cut excess edge on the front & back of the panel.
  • Flush/Pre-Trimming Unit 3201: Top & bottom trim station, 0.55 kW - 12,000 RPM +/- 1° angle adjustment, manual positioning with digital counters.
  • Fine/Bevel Trim Unit 3216: (2) motors 0.4kW - 12,000 RPM each, manual positioning with digital counters 
  • Profile Edge Scraping Unit: with electro-pneumatic adjustment
  •   Buffing Unit 4402: Top and bottom with oscillation. (2) motors, 0.25kW, 2850 RPM

    Complete with & Features:
  • Electronic DC brakes on all trim motors; sound cabin for all workstations.
  • Adjustable outboard panel support with swing out arms for up to 800 mm.
  • 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations. 
  • Actual Model is HOMAG  KAL 310/4/A3/S2

    Note:  This machine has a new display and a new back up one as well!
    Machine State: Still in place, but disconnected
    Inspection: Available for Inspection (By Appointment Only)
Final Removal Date: 6/15/2022
  

Note: Number of bids and bid amounts shown may vary slightly from real time.