You are not logged in.   Login  |  REGISTER  |  Help
 
  !  
Event Information  |    |    | 
BRANDT "KDF 650" EDGEBANDER (W/PRE-MILLING & CORNER ROUNDING)
Equipment Location: ORLANDO, FL
EO-230157   |  Lot # 001
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Kevin Welker
(877) 580-5844 ext. 316
Intl. +1 (704) 841-2001



If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com



Current Bid: $ 500   No Reserve
This Lot is being sold without a reserve.

The highest bidder will win this Lot. In the event that no bids are placed, this Lot will NOT be sold.
Next Bid Increment: $ 525  
 
     
Your Bid:
(
Click or Enter Bid)
  Place Your Bid
     
Your Proxy Bid:
  Place Proxy Bid  Help

Proxy Bid:

A Proxy bid is the maximum dollar amount you are willing to bid for a specific lot. The system automatically bids up to that amount on your behalf against competing bidders (if any).

EXAMPLE: You enter a "Max Proxy Bid" amount of $500 when the lot's reserve is met and the high bid is $100.  Your Proxy Bid automatically raises your bid to the next minimum bid amount, which in this example is $125, and thus makes you the current high bidder.  When a competing bidder bids $150, the system again automatically places a next increment bid of $175 for you, making you the high bidder again.  If a competing bidder bids again, proxy bidding continues until your "Max Proxy Bid" of $500 is exceeded by a bid from a competing bidder. If your high bid is not exceeded by the end of the Auction, then you win the lot.

ADVANTAGES: Should your schedule prevent you from participating near the closing of an Auction, your "Proxy Bid" quickly bids on your behalf.  Also, when your and a competing bidder's proxy bids are of equal amount ($500 in the example) at the end of the Auction, your bid wins, because you entered your $500 "Proxy Bid" amount first.

# of Bids: 1   
End Time:
Auction Closed.
Auto Refresh:   Enable Refresh Every

Event: ADVANCED MILLWORK – SALE #2
Brand/Model: BRANDT "KDF 650"
Year MFG: 2011
Machine Type: EDGEBANDER (W/PRE-MILLING & CORNER ROUNDING)
Serial #: 0-261-02-4902
Elect./Voltage: 400/230 V, 60 Cy, 3 Ph.
Location: ORLANDO, FL
Condition: Very good condition
Dimensions: 240" L  x  30" W  x  63" H
Weight: 3,970 Lbs (estimate)
Loading: Rigger Required
Comment: Only 1,057 Hrs.!
Buyer Premium: 15%

Description:
"HIGHFLEX 1650/KDF 650" Edgebander, with Pre-Milling & Corner Rounding & 1,057 Hrs.

  • NOTE: Hours are as of 2/17/23. Seller received new Edgebander in 4/23 and disconnected this machine.

  • Edgebanding thickness 0.4 - 12 mm (0.016" - 0.47"), Maximum edgebanding height 65 mm (2.56")

  •  Panel thickness 8 - 60 mm (0.31" - 2.36"), Minimum panel length 160 mm (6.30"), Minimum panel width 70 mm (2.76")

  • Variable feed speeds 8 - 18 MPM (27 - 59 FPM)

  • Infeed fence with Motorized adjustment, Top pressure beam with Motorized adjustment, Joint trimming/pre-milling unit with (2) 2.2 kW (3 HP) - 12,000 RPM - 200 Hz Motors, Panel edge pre-heater, 800 mm (31.50") Coil table; Automatic strip & coil magazine with Edging thickness: 0.4 - 3 mm (0.02" - 0.12") Roll, 0.4 - 12 mm (0.016" - 0.47") Fixed length, Optical edging material monitoring, & Guillotine; Quick-melt glue application unit with 3 kg (6.61 Lb.) Capacity, Reactivating heat lamp, Pressure zone with (1) Large driven & (3) Small idler rolls


    WORKSTATIONS:

  • End Triming Unit, with 0.35 kW (1/2 HP) - 12,000 RPM - 200 Hz Motor, 0° - 15° Chamfer, Soft-touch function

  • Top & Bottom Flush/Chamfer/Radius Trimming Unit, with (2) 12,000 RPM Motors

  • "MF 6250" Multi-Functional Trimming Unit, For trimming of edge overhang on top & bottom side as well as contour trimming on front & rear edges, with automatic adjustment to switch between thick & thin edges, with (2) 0.4 kW (1/2 HP) - 12,000 RPM - 200 Hz Motors

  • Top & Bottom Profile Scraping Unit, with 3 mm (0.12") PVC Maximum edge thickness with 3 mm Radius, Pneumatic forward & backward adjustment, Quick-change heads

  •  Glue Joint Scraping Unit

  • Top & Bottom Buffing Unit, with (2) 0.18 kW (1/4 HP) - 1,450 RPM Motors

  • 0.14 kW (0.19 HP) Top pressure beam motor, 2.2 kW (3 HP) Feed chain motor, Fully-automatic central feed chain track lubrication, "POWERCONTROL PC-20+" Control with 12" LCD Screen & BRANDT Browser

  • Includes: Sound Enclosure & Original Production Instructions
Final Removal Date: 9/29/2023
  

Note: Number of bids and bid amounts shown may vary slightly from real time.