BRANDT "KDF 970" EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Abrasive Planers
Air Compressors
Boring Mach. - 32 MM
Boring Misc. - Vertical
CNC - Routers
CNC -Flat Table Mach. Ctr.
CNC -Pod & Rail Mach. Ctr.
Door & Stair Mfg Equipmnt
Dovetail & Drawer Equip.
Dust Collector under 20 HP
Edgebanders
Edgebanders
Finishing - Ovens & Curing
Finishing - Sand/Denib/Clean
Finishing-Spray & Air M-Up
Finishing-Systems & Lines
Fork Lifts
Glass Machinery
Glue & Dowel Inserters
Glue Equipment
Laminating-Wrap/Foil/Roll
Louver & Shutter Equip.
Mat. Handlg - Pkging/Misc
Milling Machinery
Miscellaneous Equipment
Moulders - Feed Through
Panel Saws
Panel Saws - Sliding
Panel Saws - Vertical
Planers - Single & Facing
Sanders-Stroke & Edge
Saws - Cutoff & Miter
Saws - Table & Misc.
Stone Machinery
Tooling - Bit, Rip & Cut
Window-Wood Equipment

Auction Home > Edgebanders

KAY DEE COMPANY

Event Information | | |

Equipment Location: OMAHA, NE

Item in POWERBID

EO-230149 | Lot # 003

VIEW ALL MACHINE PHOTOS

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

Kevin Welker
(877) 580-5844 ext. 316
Intl. +1 (704) 841-2001

Enter Name
Enter Phone
Enter Email Invalid Email

If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com

Current High Bid:

$ 4,575

Reserve Not Met

The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.

Next Minimum Bid:

$ 4,650

% met

Your Bid:
(Click or Enter Bid)

Place Your Bid

Your Proxy Bid:

Place Proxy Bid Help

# of Bids:	7
End Time:	Auction Closed.

Auto Refresh:

Enable Refresh Every


Bulk Bidding: Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
This lot is part of a bulk bid group. Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
Current Total:
Current Bulk Bid:
	Click Here to View Bulk Bid

Event:	KAY DEE COMPANY
Brand/Model:	BRANDT "KDF 970"
Year MFG:	2007
Machine Type:	EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Serial #:	0-261-02-2542
Elect./Voltage:	480 V, 60 Cy, 3 Ph.
Location:	OMAHA, NE

Value New:
Negotiable Price:

Condition:	Good condition
Dimensions:	277" L x 47" W x 72" H
Weight:	6,850 Lbs (estimate)
Loading:	$ 750 Loading fee
Comment:	Full servo with pre-mill, corner rounding & pre-melt!

Buyer Premium:

15%

Description:

"PROFILINE KDF 970" Full Servo Edgebander with Pre-Mill, Corner Rounding & Pre-Melt Edge thickness 0.4 - 20 mm (0.02" - 0.79"), including 3 mm (0.12") PVC banding, Workpiece thickness 8 - 60 mm (0.31" - 2.38"), Minimum workpiece width 65 mm (2.56"), Minimum workpiece length 160 mm (6.30"), Working height 900 mm (35.43") 2.2 kW (3 HP) Feed motor, Variable feed speeds 36 - 65 FPM (11 - 20 MPM), Maximum feed speed using corner rounding units or applying solid wood 52 FPM (16 MPM) Infeed panel support with Roller guide extends out to 1,000 mm (39.37"), Motorized top pressure beam adjustment with 0.14 HP (0.10 kW) Motor, Motorized positioning of infeed fence 80 mm (3.15") W Heavy-duty feed chain, with Rubber pads, Automatic chain track lubrication All cutting & trimming workstations are HF (High Frequency Motors), Line control (no limit switches) for workstation functions Pre-Milling Station: (2) 3 kW (4 HP) 11,580 RPM Vertical milling/jointing heads with Recently-replaced FS Whisper Heads, Electro-pneumatic jump control, Head counter-rotation, SIKO digital units for vertical & horizontal adjustments Extended Magazine: For application of Solid material with 0.4 - 20 mm (0.02" - 0.79") Edge thickness & Coil material with 0.4 - 3 mm (0.02" - 0.19") Edge thickness Reinforced guillotine for coiled edgebanding material, 0.4 - 3.5 mm (0.2" - 0.14") Thickness & 8 - 55 mm (0.31" - 2.17") Height "Quick-Melt" Hot Melt Glue Unit: Heat-up time Approximately 12 min., Pre-melt hopper feed, Quick-change hopper & tank for color changes, Reversible glue applicator roller rotation, Retractable glue roller, Infrared heating unit positioned between glue roller and pressure zone to improve edge quality, Pneumatic positioning & Locking Programmable Pressure Zone: (1) Large driven & (4) Secondary pneumatically-controlled idle rollers, SIKO digital units for adjustments Front & Rear End Trimming Unit: (2) 1 HP 12,000 RPM Motors, Programmable pneumatic control for straight or chamfer trimming, 0° - 15° Chamfer Top & Bottom Rough Trimming Unit: (1) 1.86 kW (2-1/2 HP) Motor (No Lower Motor) Top & Bottom Fine Trimming Unit: (2) 0.55 kW (3/4 HP) 11,300 RPM Motors with Electronic brakes, Servo control bevel 0° - 25° Tilt, with Vertical & Horizontal tracing, Servo control (in/out) from control panel, DFC Radius cutters Corner Rounding Unit: (2) 0.35 kW (1/2 HP) 10,940 RPM Motors, Maximum feed speed 16 MPM (52 FPM), Automatic 2-position edge thickness Quick Change Top & Bottom Profile Scraping Unit: For rigid PVC edges, Digital quick-set system for 2 - 6 mm (0.08" to 0.24") Radius, Pneumatic indexing, Servo control (in/out) from control panel & Pneumatically-controlled blow-off nozzle Top & Bottom Buffing Unit: (2) 0.3 HP 2,800 RPM Motors, Vertical & Horizontal tilt "POWER CONTROL PC 20+" Control with 600 MHz, 256 MB RAM, USB Port, 1 GB Flash card, Internal modem for remote diagnostic access link, & 12" TFT Flat screen monitor, 7,504 Hrs. (On 6/2/22) Includes: 32-1/2" Diameter Roll Plate, Transformer, Sound Enclosure, Original Production Instructions Manual

Final Removal Date: 7/29/2022

Note: Number of bids and bid amounts shown may vary slightly from real time.

View complete terms and conditions


	Condition	All equipment is offered “as is, where is, with all faults” and no guarantee or warranty. EXF does not accept responsibility regarding the accuracy of information or descriptions supplied.


	Overtime	If a bid is made during the final (5) minutes of the item's scheduled time in the auction, the auction clock will be reset to (5) minutes until ALL bidding ceases.


	Currency	All bidding is in US-Dollars; payment must be in US-Currency. CDN Bidders and Buyers, will also be charged the applicable sales taxes such as GST, PST, and HST for Canadian Auction Events.


	Processing Fee	Buyer agrees that all transactions are subject to a $ 25 Processing Fee for all items purchased on the same calendar day in the same auction event.


	Payment	Buyer agrees to remit payment via Certified Check, Wire Transfer, or Credit Card to EX-FACTORYAuctions by the close of the 3rd business day following the receipt of Invoice. NOTES: In the event the Buyer elects to make payment by accepted Credit Cards, a 3% Administrative Fee will be added. Credit Card payments are limited to …US-$ 20,000. Only Credit Cards issued by a US or Canadian Financial Institutions are accepted. Upon receipt of Invoice, you may use our Credit Card Payment Gateway for payment.NOTE: Canadian Credit Card payments will be processed as USD.


	Inspection	Offered equipment is available for inspection by appointment with a minimum of (36) hours notice unless otherwise stated.

General Loading & Shipping Info

Loading Types	Buyer is responsible for all loading costs associated with this lot. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere). If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.

Shipping & Freight	The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.

Pick-Up Hours	Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.

This Lot Only

Loading Fee	$ 750 Loading Fee For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer. Palletizing, crating, or special loading procedures are not included.

Removal:	7/29/2022 is the Final Date for Removal.

If you have any other questions related to shipping prior to an auction closing that are not answered above, please use the form below to contact us. We work diligently to answer all requests. Questions asked on the day an auction closes may be answered after bidding has ended.

I need the following information (Check each item that applies):

Can the seller Crate the item for common carrier shipment?

Do you know a rigger who can dismantle the equipment?

Can you provide installation and training?

Can I pick up the item myself?

Can you make arrangements to have the equipment loaded into an ocean container?

Add Questions Below (Enter each question per line)

I need the following information (Check each item that applies):

How can I arrange an inspection of this equipment.

Can you have the equipment disconnected and loaded?

Can you make all shipping arrangements to my door?

Can you provide a Technician to install this machine?

Where do I get Service/Parts for this machine?

Can I lease the equipment?

Add Questions Below (Enter each question per line)

1805 Sardis Rd. North | Charlotte, NC 28270 USA
US & Canada 877.580.5844 | Intl: +1 704.841.2001
info@exfactoryauctions.com

Subscribe to Stay Informed on Current and Upcoming Auction Events
Follow Us on Social Media:
Copyright © EX-FACTORY INC. \| All Rights Reserved