BIESSE "AKRON 855" EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Abrasive Planers
Air Compressors
Boring Mach. - 32 MM
Boring Misc. - Vertical
CNC - Routers
CNC -Flat Table Mach. Ctr.
CNC -Pod & Rail Mach. Ctr.
Door & Stair Mfg Equipmnt
Dovetail & Drawer Equip.
Dust Collector under 20 HP
Edgebanders
Edgebanders
Finishing - Ovens & Curing
Finishing - Sand/Denib/Clean
Finishing-Spray & Air M-Up
Finishing-Systems & Lines
Fork Lifts
Glass Machinery
Glue & Dowel Inserters
Glue Equipment
Laminating-Wrap/Foil/Roll
Louver & Shutter Equip.
Mat. Handlg - Pkging/Misc
Milling Machinery
Miscellaneous Equipment
Moulders - Feed Through
Panel Saws
Panel Saws - Sliding
Panel Saws - Vertical
Planers - Single & Facing
Sanders-Stroke & Edge
Saws - Cutoff & Miter
Saws - Table & Misc.
Stone Machinery
Tooling - Bit, Rip & Cut
Window-Wood Equipment

Auction Home > Edgebanders

LONG ISLAND WOOD PRODUCTS II

Event Information | | |

Equipment Location: HOLBROOK, NY

Item in POWERBID

EO-230140 | Lot # 001

VIEW ALL MACHINE PHOTOS

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

Kevin Welker
(877) 580-5844 ext. 316
Intl. +1 (704) 841-2001

Enter Name
Enter Phone
Enter Email Invalid Email

If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com

[EO-012317]

Current High Bid:

$ 10,001

Reserve Met

The current Bid has reached or exceeded the Seller's Reserve price for this Lot.

The highest bidder will win this Lot.

Next Minimum Bid:

$ 10,151

Your Bid:
(Click or Enter Bid)

Place Your Bid

Your Proxy Bid:

Place Proxy Bid Help

# of Bids:	10
End Time:	Auction Closed.

Auto Refresh:

Enable Refresh Every


Bulk Bidding: Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
This lot is part of a bulk bid group. Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
Current Total:
Current Bulk Bid:
	Click Here to View Bulk Bid

Event:	LONG ISLAND WOOD PRODUCTS II
Brand/Model:	BIESSE "AKRON 855"
Year MFG:	2006
Machine Type:	EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Serial #:	68896
Elect./Voltage:	230 V, 60 Cy, 3 Ph.
Location:	HOLBROOK, NY

Value New:	$ 145,000
Negotiable Price:	$

Condition:	Good condition
Dimensions:	288" L x 72" W x 72" H
Weight:	7,750 Lbs (estimate)
Loading:	Rigger Required
Comment:	Very Low Hours... 1 of 2 Edgebanders Currently Used by Seller!

Buyer Premium:

15%

Description:

Single-Sided Automatic Edgebander with Pre-Mill, Corner Rounding, Pre-Melt & Many Optional Features on Workstations! Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, & solid wood Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness, 14 - 65 mm (.55" - 2.56") Edge height, 10 - 60 mm (0.39" - 2.36") Panel thickness, 140 mm (5.50") Minimum panel length, 85 mm (3.3") Minimum panel width, Machine hours (Please see photo) Pre-Milling (Rectifier) Unit, "FI-701", Rectifies face to be edged before applying glue Horizontal & vertical movement of (2) motors on linear guides, Independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) 12,000 RPM Motors, Independent copying pads on each unit Auto-set device to ensure optimum positioning of cutters according to thickness of panel being machined, (2) 3.5 kW (4-3/4 HP) Motors Edge Feeding, Gluing & Pressing Unit, "VC-710", with Automatic edge magazine for strip & coil stock, 3 mm (.04") PVC Guillotine "TEKNO-GLUE" System, Includes: Pre-Melt, "QM-701", For quick heating & tank changing with Floating & bidirectional glue roller applicator & NC axis idle presser roller movement device Pressure Section with (1) Large driven & (4) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM) Workstations: End (Edge) Trimming Unit, "IN-701-V", (2) .35 kW (1/2 HP) 12,000 RPM Motors, Automatic 4-position programmable chamfer from control panel (0°, 3.6°, 11°, 15°), Sliding in slicing motion on 45° precision guide bar with Oversized bearing blocks Superimposed Flush (Double Edge) Trimming Unit: "RS-701", Top & bottom, (2) .8 kW (1 HP) 12,000 RPM Motors with Superimposed motor position, 1° Tilt capability, Includes: Pneumatic exclusion device & Pneumatic top/bottom motor positioner Tilting Top & Bottom Trimming Unit, "RI-701", (2) .65 kW (.87 HP) 12,000 RPM Motors, For radius top & bottom fine trimming, Unit can be tilted 0° - 45°, Includes: NC axis multiple machining device Corner Rounding Unit, "CR-200V", For corner rounding, top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (.20") Maximum edge thickness Edge Scraping Unit, "RB-701", For finishing rounded off edges in PVC or ABS up to 5 mm (.20") thickness, Includes: Pneumatic unit lifter Flat (Glue) Scraper, "RCC-700", Top & Bottom, Removes potential excess glue before buffing unit Buffing Unit, "SPL-700", Top & bottom Hot Air Blower Unit, "PH-700", (2) STEINEL "2346" 2,000 W, Reactivates color of thick plastic PC-based control panel with 15" Color LCD monitor, HF (High-frequency motors on all cutting & trimming workstations Top pressure beam programmable via positioning motor, Top pressure provided by belt hold-down 36" Diameter Coil table, Padded sound enclosure Includes: Manuals (as pictured)

Final Removal Date: 5/27/2021

Note: Number of bids and bid amounts shown may vary slightly from real time.

View complete terms and conditions


	Condition	All equipment is offered “as is, where is, with all faults” and no guarantee or warranty. EXF does not accept responsibility regarding the accuracy of information or descriptions supplied.


	Overtime	If a bid is made during the final (5) minutes of the item's scheduled time in the auction, the auction clock will be reset to (5) minutes until ALL bidding ceases.


	Currency	All bidding is in US-Dollars; payment must be in US-Currency. CDN Bidders and Buyers, will also be charged the applicable sales taxes such as GST, PST, and HST for Canadian Auction Events.


	Processing Fee	Buyer agrees that all transactions are subject to a $ 25 Processing Fee for all items purchased on the same calendar day in the same auction event.


	Payment	Buyer agrees to remit payment via Certified Check, Wire Transfer, or Credit Card to EX-FACTORYAuctions by the close of the 3rd business day following the receipt of Invoice. NOTES: In the event the Buyer elects to make payment by accepted Credit Cards, a 3% Administrative Fee will be added. Credit Card payments are limited to …US-$ 20,000. Only Credit Cards issued by a US or Canadian Financial Institutions are accepted. Upon receipt of Invoice, you may use our Credit Card Payment Gateway for payment.NOTE: Canadian Credit Card payments will be processed as USD.


	Inspection	Offered equipment is available for inspection by appointment with a minimum of (36) hours notice unless otherwise stated.

General Loading & Shipping Info

Loading Types	Buyer is responsible for all loading costs associated with this lot. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere). If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.

Shipping & Freight	The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.

Pick-Up Hours	Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.

This Lot Only

Rigger Required	A Rigger is required to load this lot for transport. You will need to hire a third party Rigger to load this item, including unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer.

Removal:	5/27/2021 is the Final Date for Removal.

If you have any other questions related to shipping prior to an auction closing that are not answered above, please use the form below to contact us. We work diligently to answer all requests. Questions asked on the day an auction closes may be answered after bidding has ended.

I need the following information (Check each item that applies):

Can the seller Crate the item for common carrier shipment?

Do you know a rigger who can dismantle the equipment?

Can you provide installation and training?

Can I pick up the item myself?

Can you make arrangements to have the equipment loaded into an ocean container?

Add Questions Below (Enter each question per line)

I need the following information (Check each item that applies):

How can I arrange an inspection of this equipment.

Can you have the equipment disconnected and loaded?

Can you make all shipping arrangements to my door?

Can you provide a Technician to install this machine?

Where do I get Service/Parts for this machine?

Can I lease the equipment?

Add Questions Below (Enter each question per line)

1805 Sardis Rd. North | Charlotte, NC 28270 USA
US & Canada 877.580.5844 | Intl: +1 704.841.2001
info@exfactoryauctions.com

Subscribe to Stay Informed on Current and Upcoming Auction Events
Follow Us on Social Media:
Copyright © EX-FACTORY INC. \| All Rights Reserved