You are not logged in.   Login  |  REGISTER  |  Help
 
    
Event Information  |    |    | 
HOMAG "KAL 310/6/A20/S2" EDGEBANDER (W/PRE-MILLING)
Equipment Location: Houston, TX
EO-230112   |  Lot # 001
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Kevin Welker
(877) 580-5844 ext. 316
Intl. +1 (704) 841-2001



If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com

[EO-012245]


This is a non-auction item up for sale. If interested, please call Kevin Welker at (877) 580-5844 ext. 316 or click on the link below.


Event: BROCHSTEINS
Brand/Model: HOMAG "KAL 310/6/A20/S2"
Year MFG: 2008
Machine Type: EDGEBANDER (W/PRE-MILLING)
Serial #: 0-200-09-6089
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Location: Houston, TX
Value New: $ 140,000
Negotiable Price: $ 12,700     Make an Offer
Condition: Good condition
Dimensions: 336" L  x  122" W  x  72" H
Weight: 8,000 Lbs (estimate)
Loading: Seller Loading
Comment: Huge price drop - Has to go! - Price includes delivery to buyer's plant door!

Description:
Production Edgebander with Pre-Milling Working Capacity: 0.4 mm - 20 mm Edge thickness capacity, Minimum panel width 55 mm, Maximum panel thickness 55 mm, Feed speeds 18 to 25 MPM (59 to 82 FPM) Pre-Milling Unit # 3481: 2 x 3 kW, 9,000 RPM, Pneumatic controlled/jump milling spindles, adjustable, manual with digital indicator infeed fence Pre-Heating Unit # 2325: With Quartz lamps for heating substrate to achieve optimum edgebonding Hot Melt Glue System "QA 34" # 2123: With Reversible glue roller applicator Edge Magazine # 2999: Multi-purpose automatic coil/strip magazine, Coils 0.3 mm - 3.0 mm, Strips 0.4 mm- 20 mm Pressure Section Type "C" # 2507: Pressure roll section with (7) Rollers, (1) Large diameter driven & (6) Idle rollers, Manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses Power Control "PC 22": Controller operates in Windows-XP environment, Keypad with LCD Display, Fault diagnostic, etc., Diagnostic analysis from HOMAG service support via Modem. Workstations End Trimming HL 84 Unit # 3050: Lightweight, High speed (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on front & back of the panel Flush/Pre-Trimming Unit # 3209: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° Angle adjustment, Manual positioning with Digital counters Bevel/Fine-Trimming Unit # 3216: Top & bottom fine or bevel trimming 2 x 0.4 KW (0.5 HP), 12,000 RPM motors, Maximum edge thickness 8 mm (5/16"), Tilts 0 - 30° with Manual digital counter positioning Open Space: For potential addition of work-unit(s) Buffing Unit: Top & bottom 2 x 0.25 kW - 2,850 RPM, Incline & height adjustable with Top pressure beam Electronic DC brakes on all trim motors, Sound cabin for all workstations Adjustable outboard panel support with swing out arms for up to 800 mm 80 mm Feed track pads, Manually adjusted V-groove belt on top pressure beam & Sound/Safety enclosure over workstations NOTE: Last Major PM Performed by Stiles Machinery in December 2017, 7-Page Report Copy Available.LOADING & SHIPPING NOTE: Price Includes Shipping Preparation, Loading & Delivery to Buyer's Plant Door!

     
      

    Note: Number of bids and bid amounts shown may vary slightly from real time.