I M A "COMPACT PC 6220" EDGEBANDER (W/PRE-MILLING)

Abrasive Planers
Air Compressors
Boring Mach. - 32 MM
Boring Misc. - Vertical
CNC - Routers
CNC -Flat Table Mach. Ctr.
CNC -Pod & Rail Mach. Ctr.
Door & Stair Mfg Equipmnt
Dovetail & Drawer Equip.
Dust Collector under 20 HP
Edgebanders
Edgebanders
Finishing - Ovens & Curing
Finishing - Sand/Denib/Clean
Finishing-Spray & Air M-Up
Finishing-Systems & Lines
Fork Lifts
Glass Machinery
Glue & Dowel Inserters
Glue Equipment
Laminating-Wrap/Foil/Roll
Louver & Shutter Equip.
Mat. Handlg - Pkging/Misc
Milling Machinery
Miscellaneous Equipment
Moulders - Feed Through
Panel Saws
Panel Saws - Sliding
Panel Saws - Vertical
Planers - Single & Facing
Sanders-Stroke & Edge
Saws - Cutoff & Miter
Saws - Table & Misc.
Stone Machinery
Tooling - Bit, Rip & Cut
Window-Wood Equipment

Auction Home > Edgebanders

INVENTORY REDUCTION EVENT!

Event Information | | |

Equipment Location: Zeeland, MI

Item in POWERBID

EO-230102 | Lot # 006

VIEW ALL MACHINE PHOTOS

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

(877) 580-5844 ext.
Intl. +1 (704) 841-2001

Enter Name
Enter Phone
Enter Email Invalid Email

If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com

Opening Bid:

$ 1,500

Reserve Not Met

The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.

Next Minimum Bid:

$ 1,500

Your Bid:
(Click or Enter Bid)

Place Your Bid

Your Proxy Bid:

Place Proxy Bid Help

# of Bids:	0
End Time:	Auction Closed.

Auto Refresh:

Enable Refresh Every


Bulk Bidding: Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
This lot is part of a bulk bid group. Bulk Bidding: A Bulk Bid is composed of (2) or more individual lots grouped together enabling a bidder to place a single bid for the entire group. After the lots close, the Bulk Bid closing bid is compared to the sum of the individual lots closing bids. That determines if the lot(s) will be sold in bulk or individually. The Bulk Bid wins if its closing bid is greater than or equal to the sum of the individual lot closing bids. The Individual lots win if the sum of the individual lots’ closing bids is greater than the Bulk Bid closing bid. Individual lots that do not meet the reserve will count as $0.00 toward the individual lot total. Also, higher proxy amounts have no value in determining the total of all individual lots in comparison to the winning Bulk Bid. ONLY the "current high bid" at the close of the lots will be used to determine if the lot will be sold in bulk or individually. When you are the high bidder of a lot in a Bulk Bid group and the reserve is met, you may increase your own bid by using a "Jump Bid" to improve your chance as the winning bidder for that lot.
Current Total:
Current Bulk Bid:
	Click Here to View Bulk Bid

Event:	INVENTORY REDUCTION EVENT!
Brand/Model:	I M A "COMPACT PC 6220"
Year MFG:	1999
Machine Type:	EDGEBANDER (W/PRE-MILLING)
Serial #:	07104
Elect./Voltage:	460 V, 60 Cy, 3 Ph.
Location:	Zeeland, MI

Value New:	$ 195,000
Negotiable Price:	$ 10,000

Condition:	Good condition
Dimensions:	Unknown
Weight:	Unknown
Loading:	$ 50 Loading fee
Comment:	IMA COMPACT PC 6220 Production Edgebander ... will be checked & tested prior to shipping!

Buyer Premium:

15%

Description:

IMA - COMPACT PC 6220 ... Production Edgebander with Pre-Milling & Corner Rounding Working Capacity:0.4 - 20 mm (3/4") Edgebanding thickness cap. (up to 3mm in coil); 10 - 50 mm panel thickness, 60 mm min. panel width & 150 mm minimum panel length.Equipped with: Pre-Milling Unit: 2 x 3.0 KW (4.0 HP) Vertical spindles - 12,000 RPM motor ea. 200 Hz, both w/jump movement and reversible rotation, SIKO digital readouts, particle & debris air jet blower. Panel Preheater: Infrared heaters betweedn pre-milling and gluing section. Automatic Combination Strip/Coil Edge Magazine: Strip feed for up to 20 mm (3/4"), coiled material up to 3 mm thickness. Hot Melt Glue System: Pre-Melt hopper (approx. 1 liter), electronic temperature control, and separate applicator roll drive. Side Pressure Section: 6-Roller pressure zone with (1) large drive and (5) idle rollers, servo motor positioning and manual digital indicator controlled. Workstations: End Trimming: Double motor end trim (1 HP - 12,000 RPM motors), adjustable 0° - 15° for chamfer cuts. Flush/Bevel/Radius Trimming Unit: Top & bottom flush/radius trimmer (2) 2.5 HP - 12,000 RPM ea. 200 Hz) adjustable 0° - 30° tilt. Multipurpose "Fine Trim & Corner Rounding" Unit: For radius trimming of top & bottom longitudinal edge AND top & bottom corners (leading & trailing) when edgebanding all (4) sides (2 motors, 1 HP - 12,000 RPM ea. 200 Hz). Profile Scraping Unit: Top & bottom profile scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes, SIKO digital readouts for easy setup (currently set up with 3 mm Radius tooling). Buffing Unit: Top & bottom ( 2 x 0.33 HP - 1,500 RPM ea. motor) tilts 0° - 30°. PVC Smoothing Unit: Top & Bottom PVC color restoration unit IMA's patented unit.Controls:IMATRONIC-121: Industrial PC Controller, VGA-LCD color display panel for programming & setup functions.Complete with:Variable Feed Speed 8 - 20 MPM (26 - 66 FPM); 80 mm wide track pads. - (200 Hz) Frequency changer, sound enclosure w/interior lighting over all milling units. Includes: Used tooling on all stations. (5) 60 mm dust ports, and (1) 100 mm dust port on the PVC scrape station.Actual Model Number: COMPACT/PC/F/DV/6220

Final Removal Date: 2/8/2019

Note: Number of bids and bid amounts shown may vary slightly from real time.

View complete terms and conditions


	Condition	All equipment is offered “as is, where is, with all faults” and no guarantee or warranty. EXF does not accept responsibility regarding the accuracy of information or descriptions supplied.


	Overtime	If a bid is made during the final (5) minutes of the item's scheduled time in the auction, the auction clock will be reset to (5) minutes until ALL bidding ceases.


	Currency	All bidding is in US-Dollars; payment must be in US-Currency. CDN Bidders and Buyers, will also be charged the applicable sales taxes such as GST, PST, and HST for Canadian Auction Events.


	Processing Fee	Buyer agrees that all transactions are subject to a $ 25 Processing Fee for all items purchased on the same calendar day in the same auction event.


	Payment	Buyer agrees to remit payment via Certified Check, Wire Transfer, or Credit Card to EX-FACTORYAuctions by the close of the 3rd business day following the receipt of Invoice. NOTES: In the event the Buyer elects to make payment by accepted Credit Cards, a 3% Administrative Fee will be added. Credit Card payments are limited to …US-$ 20,000. Only Credit Cards issued by a US or Canadian Financial Institutions are accepted. Upon receipt of Invoice, you may use our Credit Card Payment Gateway for payment.NOTE: Canadian Credit Card payments will be processed as USD.


	Inspection	Offered equipment is available for inspection by appointment with a minimum of (36) hours notice unless otherwise stated.

General Loading & Shipping Info

Loading Types	Buyer is responsible for all loading costs associated with this lot. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere). If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.

Shipping & Freight	The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.

Pick-Up Hours	Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.

This Lot Only

Loading Fee	$ 50 Loading Fee For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer. Palletizing, crating, or special loading procedures are not included.

Removal:	2/8/2019 is the Final Date for Removal.

If you have any other questions related to shipping prior to an auction closing that are not answered above, please use the form below to contact us. We work diligently to answer all requests. Questions asked on the day an auction closes may be answered after bidding has ended.

I need the following information (Check each item that applies):

Can the seller Crate the item for common carrier shipment?

Do you know a rigger who can dismantle the equipment?

Can you provide installation and training?

Can I pick up the item myself?

Can you make arrangements to have the equipment loaded into an ocean container?

Add Questions Below (Enter each question per line)

I need the following information (Check each item that applies):

How can I arrange an inspection of this equipment.

Can you have the equipment disconnected and loaded?

Can you make all shipping arrangements to my door?

Can you provide a Technician to install this machine?

Where do I get Service/Parts for this machine?

Can I lease the equipment?

Add Questions Below (Enter each question per line)

1805 Sardis Rd. North | Charlotte, NC 28270 USA
US & Canada 877.580.5844 | Intl: +1 704.841.2001
info@exfactoryauctions.com

Subscribe to Stay Informed on Current and Upcoming Auction Events
Follow Us on Social Media:
Copyright © EX-FACTORY INC. \| All Rights Reserved