You are not logged in.   Login  |  REGISTER  |  Help
 
Auction Home >  CNC -Pod & Rail Mach. Ctr.   
    
CRAWFORD KITCHENS
Event Information  |    |    | 
MORBIDELLI "AUTHOR 600 S" CNC MACHINING CENTER WITH ATC
Equipment Location: MARTINEZ, GA
BP-230135   |  Lot # 002
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Walt Piedrahita
(877) 580-5844 ext. 379
Intl. +1 (704) 841-2001



If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com



Current High Bid: $ 7,500   Reserve Not Met
The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.
Next Minimum Bid: $ 7,600  
 
     
Your Bid:
(Click or Enter Bid) 		  Place Your Bid
     
Your Proxy Bid:
   Place Proxy Bid  Help
# of Bids: 8   
End Time:
Auction Closed.
Auto Refresh:   Enable Refresh Every
Event: CRAWFORD KITCHENS
Brand/Model: MORBIDELLI "AUTHOR 600 S"
Year MFG: 2005
Machine Type: CNC MACHINING CENTER WITH ATC
Serial #: AL/007793
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph.
Location: MARTINEZ, GA
Condition: Good condition
Dimensions: 0" L  x  0" W  x  0" H
Weight: Lbs (estimate)
Loading: Rigger Required
Comment:
Buyer Premium: 15%
Description:
Working cap.: X-Axis is 173.2" (4,400 mm), Y-axis 66.9" (1,700 mm) when routing, Z-axis 7.1" (180 mm); positioning speed on X- & Y-axis is 262 FPM. - YASKAWA AC Servo motors in all (3) axes. Equipped with: (30) Independent vertical boring spindles, 5 HP - 4,500 RPM motor drives the (14) spindles on the Y-axis & (16) spindles on the X-axis. Features: (10) Horizontal spindles for boring on all four edges of the panel, (3 + 3) on the X-axis (3 in ea. direction) and (1 + 1) are paralleled with the Y-axis (1 in ea. direction). Options included: (1) Vertically mounted 15 HP HSK router with electro-spindle, unit is inverter driven at 12,000 - 18,000 RPM, ATC magazine for (10) tools with HSK adapter & automatic "on-the-fly" changing. Worktable: (8) Tubeless vacuum holddown support rails, each rail has (1) vacuum cup of 140 mm x 114 mm and (1) vacuum cup 125 mm x 75 mm; total of (16) vacuum cups; rails have pneumatic locking control, vacuum rails slide on THK guides in the X-axis. Also includes: (8) Panel lifting rails to assist in the loading-and-unloading of larger panels; the worktable has (4) pop-up side stops, (2) rows of pop-up backstops which create (4) separate work zones (four 0/0 points). Controller: DELL "NUM CN" PC Based controller mounted in separate control cabinet, INTEL 1.0 GHz Pentium III microprocessor, Windows-based operating environment, 20 GB hard drive, 56 K modem, integrated 3Com network card, 128 MB, 15" VGA color monitor, and ergonomic keypad. Computer features: CD Rom 24X, 3-1/2" disk drive and (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-OPERATOR Interface offers incredible list of functions from (a) auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Additionally equipped with: On-board mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror-imaging, and repeat imaging. Includes: 1 kW Low voltage stabilizer for single-phase voltage running the microprocesser, auto-transformer, BECKER 3,500 CFM/Hr (100 cbm/Hr) vacuum pump, and a forced lubrication system. • CE standards (with Bumpers)

    Final Removal Date: 6/28/2019
      

    Note: Number of bids and bid amounts shown may vary slightly from real time.