Browse Auctions By:
Category
Manufacturer


And thousands more at EX-FACTORY!
              Next


DetailsTermsLoad & Ship InfoRequest More Info
 
HOMAG "KAL 210 AMBITION" EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Lot #: 001
Print

Item # EO-230090  Play Video
Additional Photos (click to view larger)


Literature (click to view Larger)
       
       
       
       
       
       
 


Current Bid: $ 20,000  Reserve Met
Your Maximum Bid:
(Proxy Bid)
$  
Enter $ 20,200 or more
(or click to autofill bid)
$ 20,200 $ 20,600
$ 21,200 $ 22,000
Increase Your Own Bid:
(Jump Bid)
$  
# of Bids: 8   
End Time: 28 Days, 23 Hours, 8 Minutes
(1/10/2018  2:05pm EST)
Refresh:   Enable Refresh Every

Brand/Model: HOMAG "KAL 210 AMBITION"
Year MFG: 2013
Machine Type: EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Serial #: 0-200-09-8634
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Location: WOODBRIDGE, ON
Dimensions: 295" L  x  40" W  x  72" H
Weight: 8,500 Lbs (estimate)
Loading: Rigger Required
Comment: Very Popular Production Edgebander - easy to operate!

HOMAG KAL 210 AMBITION 2262 ... Edgebander with Pre-Milling & Corner Rounding:

 Features & Specifications:
Edge thickness, coiled stock min/max, 0.4 - 3 mm (0.016. - 1/8"), straight edges, min/max. 0.3 - 6 mm (0.16 - 15/64"), panel thickness min/max. 12 - 40 mm (15/32" - 1-9/16").

 Pre-Milling Station:
Two vertical jointing spindles; KW 3.0 x 2 (HP 4.0 x 2), 150 Hz, 9,000 RPM Motors; equipped with panel blow-off device and SIKO digital counters for adjustments.

 Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application.

 Edge Magazine Combination: Strip processing and (2) coil vertical magazine.

 Gluing System QA-34:: EVA, Quick Melt hopper feeder & roller applicator (reversible).

 Pressure Section Type C: Digital/mechanical positioning with (1) large 150 mm dia. driven & (6) idle rollers, pneumatically pressure control depending on edgbanding material used.

 Workstations:

 End Trimming Unit "HL-81": kW 0.8 x 2 (HP 1.0 x 2) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer 30 deg. to straight cut.

 Rough/Pre-Trimming Unit: Top & bottom, kW 0.55 x 2 (HP 1.0 x 2) - 12,000 RPM ea. motor; Height adjustment with the top pressure-beam and tilting range +/- 1°.

 Profile/Bevel/Corner Rounding Unit "FK11": Multi function (2) motors to fine trim the edge overhangs at the work-piece upper and lower edge, as well as trimming around the front & rear vertical edge. kW 0.4 x 2 (HP 0.54 x 2) motor ea.

 Profile/Bevel Scraping Unit "PN-10": Top & bottom for thick PVC/ABS, pneumatically activated.

 Flat Glue Scraper Unit: Top & bottom, pneumatically activated to remove potential glue squeeze-out.

 Buffing Unit "FA11": Top & bottom edge buffing/polishing.

 HOMATIC PC 22 Power Control: Controller functions in Windows environment and features: Keypad w/LCD flat screen display, fault diagnostic, OS9 real-time operating system. Hand-held control pendant reaching to the out-feed end of the machine, very useful for set-up and testing new programs.

 Variable Feed-speed: From 18 - 25 MPM (59 ~ 82 FPM); 80 mm feed track pads, and V-groove belt on top pressure beam which is motorized; motorized raising & lowering of top pressure beam through program selection.>

 Spraying Units: (1) For "anti-sticking" on in-feed side of the machine, (1) prior to Buffing Unit for edge polishing.

 Other Features:: SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, standard adjustable outboard panel support with additional floor supports for heavy panels. Transformer to supply 400 Volt to the machine

 
FUNCTIONALITY VIDEO:
Be sure you watch the video attached with this listing. You will find it below the main picture, right hand side "Play Video"

 SHIP PREP:
Local Qualified Technician available to professionally decommission and prepare this machine for transport by Flatbed Truck, ... for cost estimate please contact the Auction Manager.

 RIGGING:
Local Rigger available, ... for cost to load on a Flatbed Truck, please contact the Auction Manager.

NOTE: Conducted in Canadian Dollars


Final Removal Date: 2/2/2018

General Loading & Shipping Info

Loading Types Buyer is responsible for all loading costs associated with this lot.
  1. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements.

  2. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services.

  3. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere).

  4. If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.
 
Shipping & Freight The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.
 
Pick-Up Hours Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.
 

This Lot Only

Rigger Required A Rigger is required to load this lot for transport.
You will need to hire a third party Rigger to load this item, including unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer.

Removal: 2/2/2018 is the Final Date for Removal.


Close

Contact the Auction Manager:   Karl Balg   (310) 619-7626 or Karl@exfactoryauctions.com.

       

  

Note: Number of bids and bid amounts shown may vary slightly from real time.


   
 
EX-FACTORY
Over 6,000 Machines
in 100 plus Categories!
Stone and Glass
The Exclusive Place to Buy and
Sell Stone & Glass Equipment!
Metalworking Machinery
Hundreds of Used & New
Industrial Machines
Zeeland Showroom
60,000 sq. ft. Warehouse
w/Showroom & Rebuild

1805 Sardis Rd. North | Charlotte, NC 28270 USA
Ph: 877-580-5844 (US / Canada) | Intl: +1 704-815-1775 | Fax: +1 704-841-1200
Copyright © 2017 EX-FACTORY INC. | All rights reserved.
customer.service@exfactoryauctions.com